Phone answered 24/7 · Jacksonville, FL and nearby communities

Call 24/7: (904) 526-8330
First Coast Water ResponseWater Damage Help · Jacksonville, FL

How Do You Test a Well After Flood Damage?

Last updated October 31, 2026

The short answer

Why Floodwater Contaminates Well Water

Floodwater can carry sewage, agricultural runoff, and chemicals into your well, even if the well cap seems secure. This surface water seeps through the ground, potentially entering cracks in the well casing or the surrounding aquifer. Contaminants like bacteria or nitrates pose serious health risks. Because you cannot see, smell, or taste many of these hazards, testing is the only way to verify safety.

Heavy rain saturates the ground, reducing its natural ability to filter pollutants before they reach groundwater. If floodwaters have covered your wellhead or pooled nearby, you must assume your water supply is compromised. The risk is higher if flooding came from a river, sewer backup, or agricultural area. Testing is a critical first step before you resume any use of the water for consumption.

The Laboratory Testing Process

A laboratory provides you with specific sampling bottles and detailed instructions for collection. Following these steps precisely is vital, as improper sampling can ruin the test and give false results. Typically, you will need to run the well pump for several minutes before collecting the sample from an outdoor spigot or a disinfected indoor tap. The sample must be kept cool and delivered to the lab within a strict timeframe to ensure accuracy.

The lab analyzes the sample for total coliform bacteria and E. Coli, which indicate fecal contamination. They may also test for nitrates, which are common in flood runoff from fertilizers. More extensive tests check for volatile organic compounds, pesticides, or heavy metals if floodwaters contained industrial or chemical waste. The lab sends you a formal report detailing the concentration of any contaminants found, which tells you if the water is safe.

  • Contact your local or state health department for a list of recommended water testing laboratories.
  • Order a test kit or instructions for bacteria (total coliform and E. Coli) as an absolute minimum.
  • Consider additional tests for nitrates, lead, or pesticides based on local land use and flood sources.
  • Follow the lab's sampling instructions exactly, including any required disinfection of the tap.
  • Keep the sample cool with ice packs and deliver it to the lab within 24 hours of collection.
  • Do not use the well water for drinking or cooking until you receive and review the clear test results.

What to Do While Waiting for Results

Until you receive confirmation that your water is safe, you must use an alternative water source. This can be bottled water for drinking, cooking, making infant formula, and brushing your teeth. You may be able to use your well water for flushing toilets or other non-consumptive uses, but check with local health authorities for guidance. It is prudent to plan for this interim period to last several days.

Next Steps After Receiving Test Results

If your test results show no contamination, you can generally resume normal use of your well water. It is still a good practice to run all faucets for several minutes to flush the household plumbing system. You might consider retesting in a few weeks as a precaution, as some contaminants can migrate slowly through groundwater. Keep a copy of your clear test results for your records.

If tests show contamination, you must not use the water. You will likely need to disinfect the well and plumbing system, a process often called shock chlorination. This involves calculating the right amount of chlorine bleach, circulating it through the system, and then flushing it completely. After this disinfection process, you must retest the water to confirm the problem is resolved before using it again.

When to Call for Professional Help

You may need to contact local water damage pros if floodwater has caused damage to the well structure itself, such as a cracked casing or a damaged seal. They have equipment to assess and repair physical damage to the well that could allow ongoing contamination. This is separate from the water quality testing, which is handled by a laboratory.

If your well requires repeated disinfection or continues to test positive for contaminants, the problem may be structural or with the surrounding groundwater. In these cases, consulting with a well drilling or water systems professional is the next step. They can evaluate if you need a new well, a deeper well, or a permanent water treatment system like a chlorinator or ultraviolet filter.

Need help right now?

Call (904) 526-8330 any time, day or night, and describe what happened.

Call Now (904) 526-8330

Frequently asked questions

How much does well water testing cost after a flood?

Costs vary depending on the number of contaminants tested. A basic bacteria test often costs $20 to $50, while a full chemical panel can be $200 to $500. The final price depends on the lab and the specific tests you need based on the flood's likely contaminants.

Will my homeowner's insurance cover well testing or repair?

Coverage depends entirely on your specific policy and the cause of the flood damage. Some policies may cover certain repairs if the damage is sudden and accidental. Policies vary, and your insurer decides what is covered. Contact your insurance company to discuss your situation.

Can I shock my well myself to disinfect it?

Homeowners can shock a well, but it requires careful calculation and handling of chlorine bleach. You must follow precise procedures from your health department to ensure effectiveness and safety. After shocking, you must retest the water to confirm disinfection worked before using the water for consumption.

Call Now (904) 526-8330