The short answer
Professional Tools for Detection
Professionals use non-invasive tools to locate moisture, which leads to mold. A moisture meter measures the water content in building materials like drywall and wood. Pin-type meters probe surfaces, while pinless meters scan areas without damage. Elevated readings in a dry area signal a hidden leak and potential mold growth behind the surface.
Thermal imaging cameras detect temperature differences caused by wet materials. Cooler spots often appear on the screen where evaporation is happening. This allows the pros to map the extent of moisture behind walls or under flooring. A borescope, a small camera on a flexible tube, can then look inside cavities through a tiny hole to visually confirm mold.
Where Mold Commonly Hides
Mold thrives in dark, undisturbed places with a constant moisture source. Areas that have gotten wet and were not dried quickly are prime locations. This includes spaces behind walls that were affected by a burst pipe or a leaking shower pan. Mold can also grow on the backside of drywall or paneling if room-side humidity is high.
- Behind walls, especially near plumbing lines for sinks, showers, and toilets.
- Underneath flooring materials like laminate, vinyl, or carpet and its padding.
- Above ceiling tiles or in attic spaces from roof leaks or poor ventilation.
- Inside HVAC systems, ductwork, and around air handler drip pans.
- Behind large appliances like refrigerators, washing machines, and dishwashers.
- Within wall cavities that experienced flooding or slow seepage from the foundation.
The Inspection Process
A thorough inspection starts with a visual assessment and discussion of the home's history. The pros will ask about past leaks, floods, or areas of persistent condensation. They note any signs you have observed to guide the investigation. This initial step helps narrow down the most likely zones for hidden moisture and mold.
Next, they systematically use detection tools. They may scan walls and floors with a thermal camera to find anomalies. They then use a moisture meter to quantify the dampness in those specific spots. If necessary, they might make a small, strategic inspection hole to insert a borescope for a direct visual, minimizing damage to your home.
What to Do If You Find Mold
If you suspect or confirm hidden mold, limit disturbance to prevent spreading spores. Avoid tearing into walls yourself, as this can release a large amount of mold into your living space. Keep the area ventilated if possible, and consider restricting access, especially for children, the elderly, or anyone with respiratory issues. Safety comes first in these situations.
For confirmed growth, contact a mold remediation professional. They have the training and equipment to safely contain the area, remove contaminated materials, and clean the space. The water damage pros who found the moisture can often recommend a qualified specialist. Remember, fixing the underlying water problem is essential; otherwise, the mold will likely return.
Water damage does not wait
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (904) 526-8330Frequently asked questions
Can I test for hidden mold myself?
Home test kits are available, but their reliability varies. They can confirm mold is present but often cannot identify the exact type or extent. For a hidden problem, professional inspection with proper tools is more accurate. This gives you a clearer picture of what you are dealing with.
Does homeowners insurance cover mold removal?
Coverage depends on the source of the water that caused the mold. Sudden, accidental events like a burst pipe are more likely to be covered than mold from long-term neglect or humidity. Policies vary, and your insurer decides what is covered. Review your policy or speak with your agent for specifics.
What if the mold is behind drywall?
Mold behind drywall requires careful removal by a professional. The affected section of drywall typically needs to be cut out and discarded. The cavity behind must be cleaned and dried completely before new drywall is installed. The source of moisture must also be repaired to prevent a recurrence.